21/03/2013
IGAAdmin
Administrator
Posts: 245
Reputation: 5
|
1) After battery disconnection it will be necessary to initialize each door window control motor individually to enable operation of the one touch function.
Operate the window control switch until the door window glass is fully closed and continue to hold the switch for a further two seconds.
2) Release the control switch.
3) Operate the window control switch in the closed position and continue to operate the window control switch for a further two seconds.
4) Operate the window control switch until the door window glass is fully open position (one touch down)
5) If the window initialisation has been completed successfully, when the window control switch is operated, the door window glass should move to the fully closed position (one touch up) automatically. If not carry out the full procedure again.
6) Repeat the initialization procedure on all remaining window controls.
|
|
|
0
• link
|